by George Hatfield 2003 U295 36′
Here is some info on installing a Luxe Bidet (Neo 320) on a Sealand Traveler toilet. We purchased the bidet from Amazon (connections to bidet 2.jpg (Elite Series) – Self Cleaning Dual Nozzle – Hot and Cold). It fits the toilet perfectly and was not too difficult to plumb. Also, it is not electric like many other models. The bidet requires both hot and cold water, so I tapped into the adjacent sink 1/2″ PEX water lines and used GatorBite T connectors.
I then ran the 1/2″ PEX under the clothes hamper where it was terminated with a 1/2″ GatorBite FNPT adapters.
From there I used 3/8 OD PVC tubing to the bidet using Watts Quick Connect adapters (PL3027 and PL3065). I bought all the connectors at Lowes. I drilled a 3/8″ hole in plastic plugs and used them to line the hole through the plywood paneling for the tubing to the bidet. See the pictures below. The pipe insulation was used to keep the PEX and PVC from rubbing against other stuff.
